Garrard 301 Single Arm Classic Plinth









Classic single arm plinth in Hawaiian Koa.   This has the Track Audio ‘Turntable footers’.  The interior surfaces are finished in a textured acrylic coating.

The armboard is fixed securely to the plinth with 3 socket head cap screws into threaded inserts.  There is a port that exits the rear of the plinth for phono cables.  There is also a port on the bottom of the plinth to aid in the routing of phono cables, if needed.

We make our own veneers and surface them to 1.8mm-2.3mm.  This is not the paper thin veneer which is commercially produced and most commonly used.  The thickness is clearly visible at the joint between the top and the sides.

This is the wiring harness we supply with every plinth.  It is made from highly flexible, high temperature silicone with a flexible, fine stranded core.  This harness terminates at the rear of the plinth, into a Furutech IEC AC inlet which accepts any common IEC fitted power cable.

This is an example of the Classic plinth in our ‘Industrial’ finish.  This is a full featured plinth with an attractive price tag.  The finish is a very smooth hand rubbed oil with a gorgeous sheen.  A nice top veneer is applied over the Baltic Birch plywood stack

This Mexican Cocobolo Classic plinth is finished in catalyzed polyester, the same finish which is used on high end pianos